Submersible Slurry Pump for Iron and Steel Production Three phase induction motor 15hp submersible pump
Product Description
According to market needs, the pump is divided into common type (excluding the ultra-mild leakage
protection device) and full insurance-type two kinds. Full insurance-type submersible sewage pump must
an pump supporting the use of dedicated control cabinet to achieve the perfect results.
Pump Model | Outlet Dia (mm) | Flow Rate (m3/hr) | Head (m) | Power (kw) |
50ASW | 50 | 5-40 | 7-38 | 0.75-7.5 |
65ASW | 65 | 10-45 | 8-37 | 2.2-7.5 |
80ASW | 80 | 40-75 | 6-28 | 2.2-7.5 |
100ASW | 100 | 65-120 | 4-45 | 3-22 |
150ASW | 150 | 80-200 | 5-62 | 5.5-55 |
200ASW | 200 | 250-500 | 6-50 | 11-75 |
250ASW | 250 | 300-800 | 5-53 | 15-132 |
300ASW | 300 | 500-1400 | 5-38 | 18.5-132 |
350ASW | 350 | 900-2600 | 5-50 | 30-355 |
400ASW | 400 | 1200-2800 | 3-47 | 30-355 |
500ASW | 500 | 1500-4000 | 4-32 | 55-250 |
600ASW | 600 | 2500-6000 | 6-25 | 110-315 |
water
sewage, waste water
harbour construction
ash transfer
silt removal
sand and gravel pumping
barge and tank clean out
lime slurry
coal runoff sumps
food waste
Bearing:
Imported SKF of NTN bearing, which, with a reasonable configuration, can oxtend the duration of the pump.
Cooling:
The buit-in cooling system can have the pump normally work whether the motor is on or under the liquid surface. A part of the liquid is extracted to bring out the beat produced by the motor from the pump circulation to the cooling barrel and to the pump casing and, when external cooling is required, the cooling sleeve may be separated from the pump casing and individually connected to the cooling system.
Motor:
Of F class insulation, max. working temperatures 155 C, and of a protective grade IPX8 with the effective seal.
Mechanical seal:
Use high quality mechanic seal , two ways of the seal are in series with each other and individually work to separate the motor from the pump seal to provide the motor with a dual protection.
Impeller:
With the optimized design, the impeller wil not be blocked up when to transport liquid with its optimum flow and rate and the maximum efficiency. There are suitable impellers at choice for every point of working condition.
Shaft:
The pump is coaxial with the motor and the sealing device on the end of the shaft preven ts against contacting with the medium to protect is from corrosion.
Installation Type
Sherry Lee
P: +86 311 899 40549
Office C: +86 150 3285 7866
Skype: pump_sales_sherry
Email: sherry at angroupcn.com (Please put "@" to "at" when you send the email)
Contact us if you need more details on 15hp Submersible Pump. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Submersible Slurry Pump、15hp Submersible Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Submersible Sewage Pump
Premium Related Products
