stainless steel impeller split case pump
Product Description
stainless steel impeller split case pump
Special Features Of power station split case Water Pump
1.Cartridge Mechanical Seal
Cartridge style mechanical seal. and seal plate are mounted on the
shaft sleeve, as a single, cartridge style, assembly.
2. Service with ease.
The one piece cartridge assembly is easily removed for service.
The replacement assembly may be installed, just as easily, with no
special seal adjustments necessary. Standard mechanical seal is
an industry standard design, that is readily available at local seal
supply houses.
3. Greater temperature and pressure parameters.
Various types of mechanical seals and packed glands, are available
to extend the standard pressure and temperature parameters.
Power station water pump – Horizontal Split Case, Centrifugal
Provide Horizontal Split Case pumps, single stage, double suction type, with pump characteristics which provide rising heads to shut off.
Refer to pump schedules for pump flows, heads, motor speed, enclosure, efficiency and power requirements.
Pumps shall be Series 4600 Horizontal Split Case type, each with flexible type coupling and OSHA guard and mounted, with motor,on a fabricated steel baseplate.
Power station Split case water pump constructure
Power station water pump Casing
Cast iron,axially split, with 15° angle tilted parting to allow for lower NPSH requirements and to minimize pump dimensions.
Suction and discharge connections, located in the lower casing, shall be flanged and of sizes indicated in the schedule and shall bedrilled and tapped for gauge connections. Suction and discharge connections shall be on the same elevation.
The top of the casing and the rotating assembly shall be removable without disturbing the piping connections.
Wearing Rings
Pump casing shall be fitted with replaceable bronze (BS1400-LG1) wearing rings.
Impeller
Bronze, double suction, fully enclosed type. Dynamically balanced.
Shaft
Carbon steel, C1045, designed for minimum deflection and vibration.
Shaft Sleeves
Sleeves shall be stainless steel 304, and form components of the cartridge mechanical seals.
Mechanical Seals
Each seal chamber shall be fitted with a cartridge type mechanical seal.
The seal component shall be of stainless steel construction with carbon vs ceramic faces and EPDM secondary seal.
The mechanical seal, shaft sleeve and seal plate shall be easily removable as a single component.
Provide seal plates with factory installed flush lines.*
Bearings
Supply dust tight deep groove ball bearings. With permanently sealed grease type lubrication.
Bearings shall be mounted in cartridge type housings, that are replaceable without opening the pump casing.
Bearings shall be removable by simply rotating the removal nut behind the bearing. No special tools or pullers are to be necessary.
Motor
Motor Horsepower ratings shown on the schedule are minimum acceptable and have been sized for
continuous operation without exceeding full load nameplate rating over the entire pump curve, exclusive of motor service factor.
Your 24x7 manufacturer team and service for Power Station Pump:
An Pump Machinery Company to Customers:
1)Quality first. We guaranteed every part of the pump must be inspected closely
2)We can help you select suitable pump model according to your working condition and requirements.
3)We can design the related base or engine for your pumps.
4)Fast delivery time, large quantity of spare parts in stock.
An Pump Machinery is your Best Split Case Pump Manufacturer
An Pump Machinery Co. ,Ltd is the power station pump manufacturer with 50+ years experienced
Our pumps export to over 90 countries all over the world in mining, power plant, dredging and dredge, hydraulic, irrigation, pulp transfer, chemical, construction, sea water and oil & gas transfer etc. click to more...
An Pump Machinery is your ISO certificated Power Station Water Pump Manufacturer
An Pump Machinery is also CE cerficated Split Casing Pump Manufacturer
24x7 service for your Power station large flow split case water pump:
Roger Chen
P: +86 311 899 40549
F: +86 311 862 71170
Wechat /whatsapp: +86 137 805 12387
Skype: chenroger1215
Email: roger at angroupcn.com
Email: pump at angroupcn.com
(Please put "@" to "at" when you send the email)
| End suction pump | Split casing pump | Multistage Pump |
 |  |  |
Contact us if you need more details on Stainless Steel Impeller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Split Case Pump、Stainless Impeller Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Water Pump > QS Split Case Pump
Premium Related Products
